Currently running 10.2.4 on LTM1600, when trying to install a Hotfix it goes until 96% and then fails. this box has two partitions hd1.1 & hd1.2, wanted to check if there is a way to successfully install the HF in the inactive partition without having to format the disk and do LVM.

have you checked /var/log/liveinstall.log?

yes on it I can see it fails at 96% and info:target location has no binary mcp database

can you post the liveinstall.log (error part)?

progress: 95/100 progress: 96/100 info: Applying UCS /var/tmp/TVV4u2wxcQ.ucs to disk sda, location 1 (/mnt/tm_install/13697.RusbNo). info: capture: status 0 returned by command: F5_INSTALL_MODE=install F5_INSTALL_SESSION_TYPE=hotfix chroot /mnt/tm_install/13697.RusbNo /usr/local/bin/im -force /var/local/ucs/config.ucs info: >++++ result: info: Extracting manifest: /var/local/ucs/config.ucs info: Product : BIG-IP info: Version : 10.2.4 info: Hostname: info: Installing --full-- configuration on host info: Installing configuration... info: Installing the license file... info: Post-processing... info: runsvstat: warning: /service/named: unable to open supervise/ok: file does not exist info: >---- info: Target location has no binary mcp database. info: updating CR definitions for target

Unable to install hot fix

nitass
Employee
Nov 02, 2014
have you checked /var/log/liveinstall.log?
VV_97218
Nimbostratus
Nov 02, 2014
yes on it I can see it fails at 96% and info:target location has no binary mcp database
- nitass
  Employee
  Nov 02, 2014
  can you post the liveinstall.log (error part)?
- VV_97218
  Nimbostratus
  Nov 02, 2014
  progress: 95/100 progress: 96/100 info: Applying UCS /var/tmp/TVV4u2wxcQ.ucs to disk sda, location 1 (/mnt/tm_install/13697.RusbNo). info: capture: status 0 returned by command: F5_INSTALL_MODE=install F5_INSTALL_SESSION_TYPE=hotfix chroot /mnt/tm_install/13697.RusbNo /usr/local/bin/im -force /var/local/ucs/config.ucs info: >++++ result: info: Extracting manifest: /var/local/ucs/config.ucs info: Product : BIG-IP info: Version : 10.2.4 info: Hostname: info: Installing --full-- configuration on host info: Installing configuration... info: Installing the license file... info: Post-processing... info: runsvstat: warning: /service/named: unable to open supervise/ok: file does not exist info: >---- info: Target location has no binary mcp database. info: updating CR definitions for target

nitass_89166

Noctilucent

Nov 02, 2014

i think target location has no binary mcp database log is not an error.

this is mine.

[root@ve10:Active] config  grep -A 30 96/100 /var/log/liveinstall.log
progress: 96/100
info: updating boot file /mnt/tm_install/23416.g7BGBm/boot/vmlinuz
debug: tm_install::DosPtable::DosPtable_get_all_devices -- current = 1
debug: tm_install::Volume::Volume_open -- name=sda.dat.boot, nw=yes, rp=(none)
debug: new temp mount dir /mnt/tm_install/23416.fxSB0P created for sda.dat.boot
debug: tm_install::Volume::Volume_close -- handle = /dev/sda1
info: updating boot file /mnt/tm_install/23416.g7BGBm/boot/initrd
debug: tm_install::DosPtable::DosPtable_get_all_devices -- current = 1
debug: tm_install::Volume::Volume_open -- name=sda.dat.boot, nw=yes, rp=(none)
debug: tm_install::Volume::Volume_close -- handle = /dev/sda1
info: Applying UCS /var/tmp/KIrhlKesAA.ucs to disk sda, location 2 (/mnt/tm_install/23416.g7BGBm).
info: capture: status 0 returned by command: F5_INSTALL_MODE=install F5_INSTALL_SESSION_TYPE=hotfix chroot /mnt/tm_install/23416.g7BGBm /usr/local/bin/im -force /var/local/ucs/config.ucs
info: >++++ result:
info: Extracting manifest: /var/local/ucs/config.ucs
info: Mode    : install
info: Product : BIG-IP
info: Platform: Z100
info: Version : UCS   : 10.2.4
info:           System: 11.3.0
info: Edition : UCS   : Hotfix HF7
info:           System: Final
info: Hostname: ve10.acme.com
info: Installing --full-- configuration on host ve10.acme.com
info: Installing configuration...
info: Installing the license file...
info: Post-processing...
info: /usr/bin/uuidgen: /usr/bin/uuidgen: cannot execute binary file
info: >----
info: Target location has no binary mcp database.
info: updating CR definitions for target
debug: tm_install::VolumeSet::VolumeSet_close -- sda, 2

VV_97218
Nimbostratus
Nov 02, 2014
it actually ends as succesful (info: Hotfix installation succeeded. )but still has the same old HF in the partition..thats the reason i wanted to check if there is a way to successfully install the HF in the inactive partition without having to format the disk and do LVM.

nitass

Employee

Nov 02, 2014

i think target location has no binary mcp database log is not an error.

this is mine.

[root@ve10:Active] config  grep -A 30 96/100 /var/log/liveinstall.log
progress: 96/100
info: updating boot file /mnt/tm_install/23416.g7BGBm/boot/vmlinuz
debug: tm_install::DosPtable::DosPtable_get_all_devices -- current = 1
debug: tm_install::Volume::Volume_open -- name=sda.dat.boot, nw=yes, rp=(none)
debug: new temp mount dir /mnt/tm_install/23416.fxSB0P created for sda.dat.boot
debug: tm_install::Volume::Volume_close -- handle = /dev/sda1
info: updating boot file /mnt/tm_install/23416.g7BGBm/boot/initrd
debug: tm_install::DosPtable::DosPtable_get_all_devices -- current = 1
debug: tm_install::Volume::Volume_open -- name=sda.dat.boot, nw=yes, rp=(none)
debug: tm_install::Volume::Volume_close -- handle = /dev/sda1
info: Applying UCS /var/tmp/KIrhlKesAA.ucs to disk sda, location 2 (/mnt/tm_install/23416.g7BGBm).
info: capture: status 0 returned by command: F5_INSTALL_MODE=install F5_INSTALL_SESSION_TYPE=hotfix chroot /mnt/tm_install/23416.g7BGBm /usr/local/bin/im -force /var/local/ucs/config.ucs
info: >++++ result:
info: Extracting manifest: /var/local/ucs/config.ucs
info: Mode    : install
info: Product : BIG-IP
info: Platform: Z100
info: Version : UCS   : 10.2.4
info:           System: 11.3.0
info: Edition : UCS   : Hotfix HF7
info:           System: Final
info: Hostname: ve10.acme.com
info: Installing --full-- configuration on host ve10.acme.com
info: Installing configuration...
info: Installing the license file...
info: Post-processing...
info: /usr/bin/uuidgen: /usr/bin/uuidgen: cannot execute binary file
info: >----
info: Target location has no binary mcp database.
info: updating CR definitions for target
debug: tm_install::VolumeSet::VolumeSet_close -- sda, 2

VV_97218
Nimbostratus
Nov 02, 2014
it actually ends as succesful (info: Hotfix installation succeeded. )but still has the same old HF in the partition..thats the reason i wanted to check if there is a way to successfully install the HF in the inactive partition without having to format the disk and do LVM.

nitass_89166

Noctilucent

Nov 02, 2014

thats the reason i wanted to check if there is a way to successfully install the HF in the inactive partition without having to format the disk and do LVM.

i am unable to install hf9 (build 855.0) but engineering hotfix for ID485936 (build 855.15).

ID485936 10.2.4 HF9 rollup breaks support for partitioned disk format

[root@B1600-R67-S19:Active] config  tmsh show sys hardware | grep -A2 Platform
Platform
  Name           BIG-IP 1600
  BIOS Revision  F5 Platform: C102 OBJ-0332-01 BIOS (build: 150) Date: 02/16/12
  Base MAC       0:1:d7:b4:47:0

[root@B1600-R67-S19:Active] config  lvscan
[root@B1600-R67-S19:Active] config 
[root@B1600-R67-S19:Active] config  tmsh install sys software hotfix Hotfix-BIGIP-10.2.4-855.0-HF9.iso volume HD1.2
[root@B1600-R67-S19:Active] config  tmsh show sys software

Sys::Software Status
Volume  Product  Version  Build  Active                                   Status
--------------------------------------------------------------------------------
HD1.1    BIG-IP   10.2.4  577.0     yes                                 complete
HD1.2    BIG-IP   10.2.4  855.0      no  failed (Can't find requested disk HD1.)

[root@B1600-R67-S19:Active] config 
[root@B1600-R67-S19:Active] config  tmsh install sys software hotfix Hotfix-BIGIP-10.2.4-HF9-855.15-ENG.iso volume HD1.2
[root@B1600-R67-S19:Active] config  tmsh show sys software

Sys::Software Status
Volume  Product  Version   Build  Active    Status
--------------------------------------------------
HD1.1    BIG-IP   10.2.4   577.0     yes  complete
HD1.2    BIG-IP   10.2.4  855.15      no  complete

VV_97218
Nimbostratus
Nov 02, 2014
Thanks
nitass_89166
Noctilucent
Nov 02, 2014
engineering hotfix is provided through support case. sol8986: F5 software life cycle policy https://support.f5.com/kb/en-us/solutions/public/8000/900/sol8986.html

nitass

Employee

Nov 02, 2014

thats the reason i wanted to check if there is a way to successfully install the HF in the inactive partition without having to format the disk and do LVM.

i am unable to install hf9 (build 855.0) but engineering hotfix for ID485936 (build 855.15).

ID485936 10.2.4 HF9 rollup breaks support for partitioned disk format

[root@B1600-R67-S19:Active] config  tmsh show sys hardware | grep -A2 Platform
Platform
  Name           BIG-IP 1600
  BIOS Revision  F5 Platform: C102 OBJ-0332-01 BIOS (build: 150) Date: 02/16/12
  Base MAC       0:1:d7:b4:47:0

[root@B1600-R67-S19:Active] config  lvscan
[root@B1600-R67-S19:Active] config 
[root@B1600-R67-S19:Active] config  tmsh install sys software hotfix Hotfix-BIGIP-10.2.4-855.0-HF9.iso volume HD1.2
[root@B1600-R67-S19:Active] config  tmsh show sys software

Sys::Software Status
Volume  Product  Version  Build  Active                                   Status
--------------------------------------------------------------------------------
HD1.1    BIG-IP   10.2.4  577.0     yes                                 complete
HD1.2    BIG-IP   10.2.4  855.0      no  failed (Can't find requested disk HD1.)

[root@B1600-R67-S19:Active] config 
[root@B1600-R67-S19:Active] config  tmsh install sys software hotfix Hotfix-BIGIP-10.2.4-HF9-855.15-ENG.iso volume HD1.2
[root@B1600-R67-S19:Active] config  tmsh show sys software

Sys::Software Status
Volume  Product  Version   Build  Active    Status
--------------------------------------------------
HD1.1    BIG-IP   10.2.4   577.0     yes  complete
HD1.2    BIG-IP   10.2.4  855.15      no  complete

VV_97218
Nimbostratus
Nov 02, 2014
Thanks
nitass
Employee
Nov 02, 2014
engineering hotfix is provided through support case. sol8986: F5 software life cycle policy https://support.f5.com/kb/en-us/solutions/public/8000/900/sol8986.html

Forum Discussion

Unable to install hot fix

Recent Discussions

Background Tasks

APM with EntraID as idP / request signed

Should config via cli rather than gui?

APM Modern Customization - modify Header in user-common.js and form in user-logon.js

Which process is consuming higher CPU

Related Content

BIG-IP Next Installation Guides

Installing BIG-IP Next on Nutanix Community Edition

Unable to Install Software image on vCMP Host

are Hot Fixes still available for installation ?

Unable to access GUI

ABOUT DEVCENTRAL

RESOURCES

SUPPORT

PARTNERS