Forum Discussion

Sunil_Kumar's avatar
Sunil_Kumar
Icon for Altostratus rankAltostratus
May 05, 2020

Unable to access server Pool via Virtual Server IP

Hi, I have setup a new F5 LTM lab into Vmware workstation 11 to test some scenario and here is my setup details. MGMT_10.1.0.100 (host only), Internal_10.2.0.100 (host only) and External_192.168.1.10...
application delivery
LTM
Mayur_Sutare's avatar
Mayur_Sutare
Icon for MVP rankMVP
May 05, 2020

As you are able to telnet VS on port 80 and also you are seeing hits on backend pool members, so just check http profile and SNAT configuration settings.

 

Mayur

  • Sunil_Kumar's avatar
    Sunil_Kumar
    Icon for Altostratus rankAltostratus
    May 05, 2020

    Hi Mayur, this is very initial level setup as I am a beginner. As I can check in VS there is no http profile has been setup yet. Regarding SNAT from the machine I am accessing the VS IP is in the same subnet as VS. So I don't thing NAT will require until and unless F5 has special requirement. But I seen this setup in CBT Nugget F5 LTM training video there trainer did not configure any http profile and SNAT and his setup was working. Just to configure this whole is setup in VMware workstation which is installed in my host machine.