tmsh command to configure pool and node in one line ?

Question

Hi All , &nbsp;
Can you please help me with tmsh command to configure nodes and pool in single line . &nbsp;
pool name - Sajan-8000&nbsp;
Node ip :  10.10.10.50&nbsp;
monitor tcp&nbsp;
Regards , 
Sajan &nbsp;

jad_tabbara__j1 · Answer

Hi Sajan, 
Try this 
tmsh create ltm pool poolname monitor tcp load-balancing-mode lb-method_name members add { toto.domain.lan:port { address x.x.x.x } }
Replace following variables :
poolnamelb-method_name (example round-robin) toto.domain.lan (the name of your backend)port (pool member listenning service)x.x.x.x (IP addr of the node)
Hope it helps
Regards

jaikumar_f5 · Answer

Here, Use the ; to separate your commands.
create ltm node 10.10.10.50 ; create ltm pool Sajan-8000 members add { 10.10.10.50:80 } monitor tcp
ltm pool Sajan-8900 {
members {
    10.10.10.50:80 {
        address 10.10.10.50
        session monitor-enabled
        state down
    }
}
monitor tcp
}

Just in case you want to create 2 commands. But you can just go and create it with the pool itself. The node will auto-created.

sajan_network_3 · Answer

Thanks Guys those command worked . 
I have one more doubt . I need to configure VIP as below but I don't want translate-address enabled &amp; translate-port enabled options . How do i achieve this in CLI command ? 
create ltm virtual Sajan-8000 { destination 10.23.30.4:8000 ip-protocol tcp mask 255.255.255.255 pool Sajan-8000 profiles add { fastL4 } source 0.0.0.0/0 }
ltm virtual Sajan-8000 {
destination 10.23.30.4:8000
ip-protocol tcp
mask 255.255.255.255
pool Sajan-8000
profiles {
    fastL4 { }
}
source 0.0.0.0/0
translate-address enabled
translate-port enabled
vs-index 21

}

jad_tabbara__j1 · Answer

Try this 
create ltm virtual Sajan-8000 { destination 10.23.30.4:8000 ip-protocol tcp mask 255.255.255.255 pool Sajan-8000 profiles add { fastL4 } translate-address disabled translate-port disabled  source 0.0.0.0/0 }

sajan_network_3 · Answer

what happens if i enable or disable 'translate-address" ?&nbsp;

Forum Discussion

tmsh command to configure pool and node in one line ?

6 Replies

Recent Discussions

Related Content

Power of tmsh commands using Ansible

Export Virtual Server Configuration in CSV - tmsh cli script

Export GTM/DNS Configuration in CSV - tmsh cli script

Parsing tmsh command output with Python TextFSM module and some Lessons learned

Looking for a TMSH command to check traffic flow