Forum Discussion
am_gli_287451
Nimbostratus
Nimbostratustcpdump flooded with failover packets
Hi,
I often have a problem with tcpdump on clustered devices.
If I e.g. start a dump like this:
'tcpdump -ni 0.0:p host 192.168.1.1'
the terminal is flooded with messages like these eve...
you want to not capture port 1026 traffic. To do so, specify “not port 1026” in the tcpdump command. For example: 'tcpdump -ni 0.0:p host 192.168.1.1 and not port 1026’