Forum Discussion
NimbostratusSyslog Pool for HSL logging through UDP
I have a virtual server www.example.com where I have an iRule that sends HSL (udp) to a remote server R1, the only member of the pool P1. This setup has worked for over a year. Now, I have a need to add another server R2 to the same pool P1. My intention is to disable R1 and enable R2 to send the data to only R2. I did the following but they did not help:
- Enable R2, disable R1 - data still goes to R1
- Remove R1 from the pool P1 - data still goes the R1
- Remove the node R1 from the Big IP LTM - data still goes to R1
I am at lost now. Can somebody help?
3 Replies
Here are a couple of possibilities. 1.The changes you made are to a HA standby unit that you didn't sync.
-
You have two similar pools with names that are very close and you edited the wrong pool.
-
You need to restart the management gui service: bigstart restart tomcat.
-
Create a new pool with R2 as a member and update the iRule pool name.
-
Sriram_129909Number 3 helped. Should have thought about it. Thanks!
Muhammad_Irfan1Cirrus
Does updating iRule during production affects traffic by any mean? I mean when i press the update button will it affect currant traffic if there is not syntax error.
