F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

Rodrigo_N_Soare's avatar
Rodrigo_N_Soare
Icon for Nimbostratus rankNimbostratus
Jul 03, 2014

Synchronization was not complete my virtual server were not all for the second box

Hello people,

 

I had Vitual Servers on a BIG-IP VE and generated a backup (UCS) and restored on an appliance adiquirido, I took care to be on the same version of VE at restore time. I believe it is not suitable to migrate a VE to cash this way, I say this because I had some problems that could remedy. But I had a problem when I put this box in HA (active / standby) synchronization was not complete my virtual server were not all for the second box. Is there any way to fix estre problem?

 

Everything was synchronized except: Some virtual servers and customization of the dashboard.

 

application delivery
LTM
management
TMOS
TMSH
virtualization

5 Replies

  • nitass's avatar
    nitass
    Icon for Employee rankEmployee
    Jul 03, 2014

    But I had a problem when I put this box in HA (active / standby) synchronization was not complete my virtual server were not all for the second box.

    can you check whether virtual-address is in floating traffic group?

    e.g.

    root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) list ltm virtual-address
ltm virtual-address 172.28.24.10 {
    address 172.28.24.10
    mask 255.255.255.255
    traffic-group traffic-group-1
}
ltm virtual-address any {
    address any
    arp disabled
    mask any
    traffic-group traffic-group-1
}
  • Rodrigo_N_Soare's avatar
    Rodrigo_N_Soare
    Icon for Nimbostratus rankNimbostratus
    Jul 07, 2014

    How do I change this information (command) from: root@(XXX)(cfg-sync Standalone)(Active)(/Common)(tmos) list ltm virtual-address X.X.X.Y ltm virtual-address X.X.X.Y { address X.X.X.Y floating disabled mask 255.255.255.255 traffic-group traffic-group-local-only unit 0 }

     

    to: root@(XXX)(cfg-sync Standalone)(Active)(/Common)(tmos) list ltm virtual-address X.X.X.Y ltm virtual-address X.X.X.Y { address X.X.X.Y mask 255.255.255.255 traffic-group traffic-group-1 }

     

  • Rodrigo_N_Soare's avatar
    Rodrigo_N_Soare
    Icon for Nimbostratus rankNimbostratus
    Jul 07, 2014

    How do I change this information (command) from: root@(XXX)(cfg-sync Standalone)(Active)(/Common)(tmos) list ltm virtual-address X.X.X.Y ltm virtual-address X.X.X.Y { address X.X.X.Y floating disabled mask 255.255.255.255 traffic-group traffic-group-local-only unit 0 }

     

    to: root@(XXX)(cfg-sync Standalone)(Active)(/Common)(tmos) list ltm virtual-address X.X.X.Y ltm virtual-address X.X.X.Y { address X.X.X.Y mask 255.255.255.255 traffic-group traffic-group-1 }

     

    • MM_F_147944's avatar
      MM_F_147944
      Icon for Nimbostratus rankNimbostratus
      Apr 13, 2016
      My HA boxes are also not fully sync like one Virtual server is not replicated to Standby as Virtual IP is also used in NAT,