Static SNAT for a Virtual Server

Hello,

 

First of you have to create a snat pool

 

On the Main tab, click Local Traffic > Address Translation > SNAT Pool List. The SNAT Pool List screen displays a list of existing SNATs. Click Create.

 

Information: A SNAT Pool is a list of Translation addresses (you can set on or several IPs).

 

Then you have to add this object to a virtual server (set it in snat field) so any traffic egressing the BIG-IP trough your VS (where you set snat pool) will be hidden/translated by one of the addresses in the pool. The addresses that you will set in the SNAT pool should be addresses that are local subnet of egressing vlan...

 

Let me now if you need additional information.

 

Regards,

 

Hi you can create SNAT Pool then applied to your VS.

 

Below link are overview and use cases of F5 SNAT:

 

https://support.f5.com/csp/article/K7820 https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-routing-administration-11-6-0/7.html