F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

Joel_106642's avatar
Joel_106642
Icon for Nimbostratus rankNimbostratus
Sep 30, 2008

SSL LTM 9.3 can't get it to work

We tried to cut over to a new pair of 6400s which have an ASM module. The F5 uses a virtual network server for all traffic to the inside vlan that doesn't require loadbalancing. All of the VIPs work...
config
design
Joel_106642's avatar
Joel_106642
Icon for Nimbostratus rankNimbostratus
Sep 30, 2008
At first we setup a "server ssl" profile then removed all profiles. But no luck. When we used the acutal server address it would connect, but if we pointed to the VIP it would not. One thing unusual on the server is there are two IP addresses assigned to an interface and only one has the default route associated with it. And that IP is not the IP used in the Pool. The server has multiple IPs do represent multiple hosts.