SSH failure in f5

hello,

did you check following points:

VS type = Layer 4

Snat= automap in you VS

VLAN and Tunnel Traffic= All (for the troubleshoot)

You can monitor your pool memeber with a simple TCP monitor and validate that your F5 can reach your backend server.

Check that you receive flow in your F5 and the ssh request is send to backend with a capture (CLI):

tcpdump -nni 0.0 host (you VS IP) and port 22

tcpdump -nni 0.0 host (you backend IP) and port 22

Do this test and let me now if you check all this point...

Regards,