snmp oid question

I’ve found great use out of some of the snmpwalk command options. First, walk the oid by name (as you have) so you can tell what is what:

[root@ltm1:Active:Standalone] config  snmpwalk -v 2c -c f5dc localhost F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState
F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState."/Common/10.10.10.1" = INTEGER: blue(4)
F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState."/Common/my.host.com" = INTEGER: blue(4)
F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState."/Common/10.43.190.50" = INTEGER: blue(4)

then use the “-On” option to reveal the numeric oid for you, and you can do a line by line compare to pull out the appropriate oidstrings you will use.

[root@ltm1:Active:Standalone] config  snmpwalk -v 2c -c f5dc -On localhost F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState
.1.3.6.1.4.1.3375.2.2.4.3.2.1.3.18.47.67.111.109.109.111.110.47.49.48.46.49.48.46.49.48.46.49 = INTEGER: blue(4)
.1.3.6.1.4.1.3375.2.2.4.3.2.1.3.19.47.67.111.109.109.111.110.47.109.121.46.104.111.115.116.46.99.111.109 = INTEGER: blue(4)
.1.3.6.1.4.1.3375.2.2.4.3.2.1.3.20.47.67.111.109.109.111.110.47.49.48.46.52.51.46.49.57.48.46.53.48 = INTEGER: blue(4)

snmptranslate is your friend as well, though with oids with quotes in them, you will need to escape them:

[root@ltm1:Active:Standalone] config  snmptranslate -On F5-BIGIP-LOCAL-MIB::ltmNodeAddrStatusAvailState.\"/Common/10.10.10.1\"
.1.3.6.1.4.1.3375.2.2.4.3.2.1.3.18.47.67.111.109.109.111.110.47.49.48.46.49.48.46.49.48.46.49