snmp data wrong on standby machine

Question

I have a pool with two members, it works flawlessly &nbsp;
snmp tells me on the Standby Machine that the pool have four members but there are only two members in real
On the active machine snmp tells me the correct number of pool members.&nbsp;

nitass · Answer

snmp tells me on the Standby Machine that the pool have four members but there are only two members in real

have you tried to run snmpget/snmpwalk on standby unit? did it return four?
if so, can you try to restart snmpd?
root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) restart sys service snmpd

cleggewie_11556 · Answer

Yes it return four &nbsp;
i did tmsh restart sys service snmpd
now with new PID  &nbsp;
but the answer is the same always 4 members &nbsp;
this is the answer:
conn_queue_svcd_per_sec=0.00;;;; conn_queue_all_svcd_per_sec=0.00;;;; total_requests_per_sec=0.00;;;; active_members=2.000000;;;; pool_members=4.000000;;;; connq_depth=0.000000;;;; connq_age_head=0.000000;;;; connq_age_max=0.000000;;;; connq_age_ema=0.000000;;;; connq_age_edm=0.000000;;;; connq_all_depth=0.000000;;;; connq_all_age_head=0.000000;;;; connq_all_age_max=0.000000;;;; connq_all_age_ema=0.000000;;;; connq_all_age_edm=0.000000;;;; curr_sessions=0.000000;;;;&nbsp;

nitass · Answer

but the answer is the same always 4 members &nbsp;

may i have the oid?&nbsp;

cleggewie_11556 · Answer

.1.3.6.1.4.1.3375.2.2.5.3.2.1.1.20.47.67.111.109.109.111.110.47.112.111.111.108.95.78.65.83.84.69.83.84.20.47.67.111.109.109.111.110.47.78.79.67.49.86.84.45.86.80.82.48.50.8181&nbsp;

nitass · Answer

is the oid correct? shouldn't it be F5-BIGIP-LOCAL-MIB::ltmPoolMemberNumber?
anyway, i think F5-BIGIP-LOCAL-MIB::ltmPoolMemberNumber is number of all the pool members.
e.g.
[root@ve11a:Active:In Sync] config  snmptranslate .1.3.6.1.4.1.3375.2.2.5.3.2.1.1.20.47.67.111.109.109.111.110.47.112.111.111.108.95.78.65.83.84.69.83.84.20.47.67.111.109.109.111.110.47.78.79.67.49.86.84.45.86.80.82.48.50.8181
F5-BIGIP-LOCAL-MIB::ltmPoolMemberPoolName."/Common/pool_NASTEST"."/Common/NOC1VT-VPR02".8181

[root@ve11a:Active:In Sync] config  snmpwalk -v 2c -c public localhost F5-BIGIP-LOCAL-MIB::ltmPoolMemberNumber
F5-BIGIP-LOCAL-MIB::ltmPoolMemberNumber.0 = INTEGER: 4

[root@ve11a:Active:In Sync] config  grep -A 7 ltmPoolMemberNumber\ OBJECT-TYPE /var/tmp/mibs_f5/F5-BIGIP-LOCAL-MIB.txt
ltmPoolMemberNumber OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
                "The number of ltmPoolMember entries in the table."
        ::= { ltmPoolMember 1 }

[root@ve11a:Active:In Sync] config  tmsh list ltm pool
ltm pool foo {
    members {
        200.200.200.101:80 {
            address 200.200.200.101
        }
        200.200.200.111:80 {
            address 200.200.200.111
        }
    }
}
ltm pool foo3868 {
    members {
        200.200.200.101:3868 {
            address 200.200.200.101
        }
    }
}
ltm pool loghost {
    members {
        172.28.24.1:514 {
            address 172.28.24.1
        }
    }
}

Forum Discussion

snmp data wrong on standby machine

8 Replies

F5 Architecture Track Sessions - AppWorld 2026

Recent Discussions

In Using the AST tool am I pointing it to TENANTS or to the F5OS(hardware) I have?

2026 is Almost Here

can you help with getting a BigIP virtual edition serial key

VIP is not responding on SYN after enabling other modules like ASM, APM and AFM.

VIP in https that redirect to another vip in https

Related Content

NGINX Virtual Machine Building with cloud-init

F5 BIG-IP Access Policy Manager (APM) Machine Tunnels for Windows

F5 BGP Peering in Active /Standby Cluster

Ubuntu Virtual Machine for NGINX Microservices March 2022 Labs

F5 BIGIP showing wrong time

ABOUT DEVCENTRAL

RESOURCES

SUPPORT

PARTNERS