Forum Discussion
alt
Nimbostratus
Nimbostratussizing the F5 appliance
Dears, I want to size an f5 appliance, the customer is publishing a application which are running without load balancers, I need to know the questionnaire that I need to ask to the customer. lets ...
I will quote from K15831: How the BIG-IP VE system enforces the licensed throughput rate
"The BIG-IP VE product license determines the maximum allowed throughput rate. When calculating throughput, the BIG-IP VE system accounts for packets ingressing and egressing the system separately. Additionally, the licensed throughput rate for ingress and egress is enforced separately. For example, if you have a 200 Mbps license, ingress into the Traffic Management Microkernel (TMM) has a limit of 200 Mbps and egress from TMM also has a limit of 200 Mbps."
However, I think the utilization of the NIC is not a quality indicator for sizing your BIG-IP appliance.
Or it shouldn't be the only parameter for sizing, take into account also connections per second and SSL TPS. Furthermore throughput and connections per second are important metrics, but they are not the only things that should be considered when sizing BIG-IP. Memory and CPU are just as important if not more important than some of the datasheet numbers. Plan for growth too.
The virtual editions datasheets will give you general performance numbers. You should refer to the datasheets as you make general sizing determinations. In most cases, these are the maximum capabilities at which either CPU or memory is completely consumed. This means determining CPU and memory requirements are extremely important in determining the appliance or virtual edition that is purchase for a solution. For, example, the amount of memory not only determines how many modules can run on a BIG-IP, but also how many concurrent connections can be maintained, as each current connection uses a finite amount of memory. CPU can be a limiting factor, HTTP compression consumers CPU, if not performed in hardware, SSL can consume CPU depending on the key size, cipher and whether the cipher is supported by hardware and for BIG-IP Virtual Editions this is always the case.
And last recommendation from: K44935357: Sizing for BIG-IP platform
"Contact your usual F5 reseller, F5 Sales, or one of F5's many Partners.
Sizing is done by Sales."
altNimbostratus
NimbostratusDear Daniel.
thanks for the reply and I would really appreciate if you stay with me till i marked this post as a solved on your name. below are my thoughts please correct me where i m wrong or is there any expert advise u can give to size the appliance it will be much appreciated.
- so lets assume my server is installed with 1G interface and the current utilization on the NIC 500 Mbps, so I can installed a f5 VM with 5 Gbps throughput ??
- so lets assume if I have 2 application servers and each of the server is installed with 1 GB NIC and their nic is utilized by 500 Mbps so I should accumulate the total utilization of both the server i.e 1 Gbps utilization to size the f5 appliance so in this case i have to size it above 1 gbps and keep it buffer for more 1 gb,
- what about the internet bandwidth, please correct me if i m not wrong the internet bandwidth pipe on that site should be above 1 gbps if both the servers nic are been utilized by 1 gbps
Thanks
- Daniel_Wolf
MVP
I will quote from K15831: How the BIG-IP VE system enforces the licensed throughput rate
"The BIG-IP VE product license determines the maximum allowed throughput rate. When calculating throughput, the BIG-IP VE system accounts for packets ingressing and egressing the system separately. Additionally, the licensed throughput rate for ingress and egress is enforced separately. For example, if you have a 200 Mbps license, ingress into the Traffic Management Microkernel (TMM) has a limit of 200 Mbps and egress from TMM also has a limit of 200 Mbps."
However, I think the utilization of the NIC is not a quality indicator for sizing your BIG-IP appliance.
Or it shouldn't be the only parameter for sizing, take into account also connections per second and SSL TPS. Furthermore throughput and connections per second are important metrics, but they are not the only things that should be considered when sizing BIG-IP. Memory and CPU are just as important if not more important than some of the datasheet numbers. Plan for growth too.
The virtual editions datasheets will give you general performance numbers. You should refer to the datasheets as you make general sizing determinations. In most cases, these are the maximum capabilities at which either CPU or memory is completely consumed. This means determining CPU and memory requirements are extremely important in determining the appliance or virtual edition that is purchase for a solution. For, example, the amount of memory not only determines how many modules can run on a BIG-IP, but also how many concurrent connections can be maintained, as each current connection uses a finite amount of memory. CPU can be a limiting factor, HTTP compression consumers CPU, if not performed in hardware, SSL can consume CPU depending on the key size, cipher and whether the cipher is supported by hardware and for BIG-IP Virtual Editions this is always the case.
And last recommendation from: K44935357: Sizing for BIG-IP platform
"Contact your usual F5 reseller, F5 Sales, or one of F5's many Partners.
Sizing is done by Sales."