Setting Virtual Server to Load balance Windows DNS Server.

b virtual Fasken_DNS_tcp_virtual_server list virtual Fasken_DNS_tcp_virtual_server { snat automap pool Fasken_DNS_pool destination 172.20.239.146:domain ip protocol tcp profiles Fasken_DNS_lan-optimized_tcp_profile {} }

b virtual Fasken_DNS_udp_virtual_server VIRTUAL ADDRESS 172.20.239.146 UNIT 1 | ARP enable | (cur, max, limit, tot) = (0, 2, 0, 908) | (pkts,bits) in = (908, 478128), out = (0, 0) +-> VIRTUAL Fasken_DNS_udp_virtual_server SERVICE domain | PVA acceleration none | (cur, max, limit, tot) = (0, 2, 0, 908) | (pkts,bits) in = (908, 478128), out = (0, 0) | requests (total) = 0 +-> POOL Fasken_DNS_pool LB METHOD member least conn MIN/CUR ACTIVE MEMBERS 0/1 | (cur, max, limit, tot) = (0, 4, 0, 908) | (pkts,bits) in = (908, 478128), out = (0, 0) +-> POOL MEMBER Fasken_DNS_pool/172.20.31.16:domain active,up | | addr session disabled priority 1 ratio 1 | | (cur, max, limit, tot) = (0, 2, 0, 69) | | (pkts,bits) in = (69, 36528), out = (0, 0) | | requests (total) = 0 +-> POOL MEMBER Fasken_DNS_pool/172.20.31.21:domain inactive,down | | addr session disabled priority 1 ratio 1 | | (cur, max, limit, tot) = (0, 0, 0, 0) | | (pkts,bits) in = (0, 0), out = (0, 0) | | requests (total) = 0 +-> POOL MEMBER Fasken_DNS_pool/172.20.31.22:domain active,up | session enabled priority 1 ratio 1 | (cur, max, limit, tot) = (0, 2, 0, 839) | (pkts,bits) in = (839, 441600), out = (0, 0) | requests (total) = 0

b pool Fasken_DNS_pool list pool Fasken_DNS_pool { lb method member least conn monitor all Fasken_DNS_monitor members { 172.20.31.16:domain { priority 1 } 172.20.31.21:domain { priority 1 } 172.20.31.22:domain { priority 1 } } }