Selective SNAT based on server network

This is a selective SNAT based on the server that is selected.

 

There are servers on multiple subnets and BIGIP is also connected to these networks.

 

 

Since the BIGIP is NOT the default GW for these networks, all traffic that is sent to the server from the BIGIP need to SNAT'd in order for load balancing to work.

 

 

We need the SNAT address to be on the same subnet as the sever. Then use a default SNAT if the BIGIP does not have a directly connected self IP address on the same network.

 

 

Thanks.