Forum Discussion

Nimbostratus

Jun 04, 2014

Routing Between DMZ & LAN using F5

Hello Everybody, I'm new on the F5 world, and I have a question about a configuration that I'll want to simulate using F5. This is related to Vmware View architecture, that's the security s...

Nimbostratus

Jun 08, 2014

Hi Friends,

I'm glad to have this support from you.

Below the result :

[root@F5-BIG-IP01:Active:Standalone] config  tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host 192.168.2.1 or host 55.10.252.10 -v

tcpdump: listening on 0.0:nnn, link-type EN10MB (Ethernet), capture size 65535 bytes ^Ct 12 12 packets captured 12 packets received by filter 0 packets dropped by kernel

[root@F5-BIG-IP01:Active:Standalone] config tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host 192.168.2.10 or host 55.10.252.1 -v tcpdump: listening on 0.0:nnn, link-type EN10MB (Ethernet), capture size 65535 bytes ^Ct 12 12 packets captured 12 packets received by filter 0 packets dropped by kernel

But for example, my server 192.168.2.10 can't ping the gateway of the F5 55.10.252.1

And ths opposite is true too.

Thank you again

nitass
Employee
Jun 08, 2014
you have to check the output file (/var/tmp/output.pcap). download it to your laptop and use tool such as wireshark to view it.
Jimb2k_159873
Nimbostratus
Jun 08, 2014
How can I do that please.