Forum Discussion
Angel_Lopez_116
Altostratus
AltostratusRight procedure to shutdown a Viprion system with vCMP
Hi there,
I got a Viprion with two blades, vCMP and several guests, and I wonder which is the recommended procedure to shutdown the whole system.
I don't know if it's enough with a "clsh sh...
Greetings Angel, It looks like you should shut the guests down with the following command, run on the host:
tmsh modify vcmp guest all state provisioned
Then, shut the entire host (or chassis) down with:
clsh shutdown now
This information comes from this solution on Askf5:
https://support.f5.com/kb/en-us/solutions/public/14000/300/sol14302.html
Also, probably best to wait a minute when changing all of the guest states.
Hope this is helpful, Kevin
Greetings Angel, It looks like you should shut the guests down with the following command, run on the host:
tmsh modify vcmp guest all state provisioned
Then, shut the entire host (or chassis) down with:
clsh shutdown now
This information comes from this solution on Askf5:
https://support.f5.com/kb/en-us/solutions/public/14000/300/sol14302.html
Also, probably best to wait a minute when changing all of the guest states.
Hope this is helpful, Kevin
Angel_Lopez_116Hi Kevin, after booting again the system the guests will be in provisioned state, right? so I'll have to run a command like "tmsh modify vcmp guest all state deployed" to get all up and running again, right? Thanks!