Forum Discussion
lipos_54863
Nimbostratus
NimbostratusReceive String problem
Hi,
I'm trying to create a regular monitor that would monitor a website with:
Send String: GET / HTTP/1.0
Receive String: Welcome Page
When I do telnet "IP of the Node"...
mjaved_62370Nimbostratus
Nimbostratus1- Ok i did enable debug can when put 200 in receive string without any inverted commas virtual server comes up below is what i can see in debug
17:07:53.845091: (_recv_active_service_ping): addr=::ffff:10.2.110.164:80 send=GET / HTTP/1.1
Host:
Connection: Close
regexp=200 recv=HTTP/1.1 400 Bad Request
Content-Type: text/html
Date: Thu, 30 Jul 2009 07:10:14 GMT
Connection: close
Content-Length: 42
*****************************
2- Now when i replace 200 with DMZ below is what debug looks like, note at this stage virtual server is down. Cant see any string coming back.
17:10:13.180514: (_main_loop): time to ping addr=::ffff:10.2.110.164:80 pending=0
17:10:13.180559: (_send_active_service_ping): addr=::ffff:10.2.110.164:80
17:10:13.180578: (_connect_to_service): creating new socket for addr=::ffff:10.2.110.164:80
17:10:13.180633: (_connect_to_service): addr=::ffff:10.2.110.164:80 connect: Operation now in progress
17:10:13.182033: (_main_loop): wfd selected for addr=::ffff:10.2.110.164:80 pending=1
17:10:13.182057: (_send_active_service_ping): addr=::ffff:10.2.110.164:80
17:10:13.182089: send_active_service_ping: addr=::ffff:10.2.110.164:80 writing GET / HTTP/1.1
Host:
Connection: Close
