Forum Discussion
VVV
Altostratus
AltostratusR2600 Enabling Multi-Interface Causes L2 Forwarding
Hello, I’m currently working on an F5 deployment with the following architecture: Two F5 R2600 devices (active/standby). Two switches connected in a full mesh configuration. The switches do n...
Nikoolayy1
MVP
MVPTo be honest in You Cannot Associate A Trunk VLAN to More Than One Interface on r2xxx/r4xxx Platfoms it is written that you could have a loop.
You should be aware of your Spanning Tree topology and make switch 1 the Bridge, also you can control the port priority on the rSeries ports under NETWORK SETTINGS > STP Configuration. Better review your STP environment as I mentioned.
