For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Techgeeeg_28888's avatar
Techgeeeg_28888
Icon for Nimbostratus rankNimbostratus
May 25, 2014

Ports requirement for Failover Pair

Hi Everyone,

 

I just need to ask a quick question regarding the ports used by the device in fail-over pair, Which ports (TCP & UDP) should be allowed on the SELF and Floating IP on the Device to make sure the Iquery runs properly and the boxes get synced properly without failure. Also if you can provide some commands to quickly track down the proper working of syn or if there is some problem/error.

 

Regards,

 

1 Reply

  • nitass's avatar
    nitass
    Icon for Employee rankEmployee
    May 25, 2014

    sol9057: Service port and protocol used for BIG-IP network failover

    http://support.f5.com/kb/en-us/solutions/public/9000/000/sol9057.html

    you should see it in connection table.

    e.g.

    root@(ve11a)(cfg-sync In Sync)(Active)(/Common)(tmos) show sys connection protocol udp
Sys::Connections
200.200.200.13:58921  200.200.200.11:1026  200.200.200.13:58921  200.200.200.11:1026  udp  0  (tmm: 1)  none
200.200.200.12:35008  200.200.200.11:1026  200.200.200.12:35008  200.200.200.11:1026  udp  0  (tmm: 0)  none
200.200.200.11:46165  200.200.200.12:1026  200.200.200.11:46165  200.200.200.12:1026  udp  0  (tmm: 1)  none
200.200.200.11:53355  200.200.200.13:1026  200.200.200.11:53355  200.200.200.13:1026  udp  0  (tmm: 1)  none
Total records returned: 4

    and this is for configsync.

    sol13946: Troubleshooting ConfigSync and device service clustering issues (11.x)

    http://support.f5.com/kb/en-us/solutions/public/13000/900/sol13946.html