Forum Discussion
kevin_gu_176876
Nimbostratus
Nimbostratuspersistence profile not syncing
We have LTM with 11.4.1 code. I noticed that when we update the persistence profile, say update the time out value, the F5 will still say it is in sync instead of the change pending. Is this normal expected behavior? Or did I miss anything?
The issue is likely to be as a result of the following article.
https://support.f5.com/kb/en-us/solutions/public/14000/200/sol14289.html.
Under the version of code your running if you've amended the base profiles that are installed off the box then the changes don't get replicated. Had the same issue previously but wasn't noticed till we failed over.
Its usually best practice to create your own profiles but use the base ones as a template and just amend yours were required.
tatmotivCirrostratus
It's not supposed to do that unless you have config auto sync enabled in your device group. Do you?
Alan_Renicor_10Altocumulus
The issue is likely to be as a result of the following article.
https://support.f5.com/kb/en-us/solutions/public/14000/200/sol14289.html.
Under the version of code your running if you've amended the base profiles that are installed off the box then the changes don't get replicated. Had the same issue previously but wasn't noticed till we failed over.
Its usually best practice to create your own profiles but use the base ones as a template and just amend yours were required.
kevin_gu_176876Alan, thanks!