Forum Discussion
Bloitus_10535
Nimbostratus
NimbostratusPersistence Conundrum
Good Afternoon All, First of all hello! Second of all, i'm attempting to configure a BIG IP LTM to balance both an online web pool and offline processing workflow pool, on a single subnet. ...
Bloitus_10535Nimbostratus
NimbostratusHi Bhattman,
Hope this is what you are after...
Web Virtual Server configuration and properties:
Name: Dev-WebTest3-VS
Destination Type: host
IP Address: 192.168.12.132
Service Port: 80
Type: standard
Protocol: TCP
HTTP profile: http (this is a default profile)
Address Translation: Enabled
Port Translations: Enabled
SNAT Pool: AutoMap (to answer your Snat question)
Default Persistence profile: Cookie_Test
NB:Cookie_Test Profile is a persistence profile with cookie method of http cookie insert and a expiration of 30 mins.
Web Pool Config and properties:
Name: Dev-WebTest3-Pool
Allow SNAT: Yes
Allow NAT: Yes
Load Balancing Method: Round Robin
Web Pool Members:
Member 1...
IP address: 192.168.12.122
Service port: 80
Member2...
IP address: 192.168.12.123
Service Port: 80
Workflow Virtual Server configuration and properties:
Name: Dev-WorkflowTest1-VS
Destination Type: Host
IP Address: 192.168.12.140
Service Port: 1099
Type: Standard
Protocol: TCP
Address Translation: Enabled
Port Translation: Enabled
SNAT Pool: AutoMap
Default persistence profile: Source_3600 (**********this has me thinking, perhaps in our tests we weren't waiting enough time for the time out to expire)
NB: Source_3600 is a source affinity persistence profile with a time of of 3600 seconds.
Workflow Pool Config and Properties
Name: Dev-WorkflowTest1-Pool1
Allow SNAT: Yes
Allow NAT: Yes
Load Balancing Method: Round Robin
Workflow Pool Members:
Member 1...
IP address: 192.168.12.139
Service Port: 1099
Member 2...
IP address: 192.168.12.235
Service port: 1099
------------------------------------------------------
I think that is everything! I'm going to retest with a smaller timeout on the workflow persistence profile.