Forum Discussion
Cirrusonline active disconnected
Hi I tried to configure HA but both f5 indicating "online active and disconnected" what will b the possible reason?
5 Replies
RaghavendraSYAltostratus
Hi,
Which bigip version you are using?
If you are using 11.x please verify below link
https://support.f5.com/csp/article/K13946?sr=33711178cso
Please try below steps to fix HA and config sync issues.
- Device Groups >put both boxes back to available.
- Delete the existing device group.
- Reset Device Trust. Choose Generate New Self-Signed Authority.
- reboot the device
- Device Trust>Peer list. Establish peering by giving right peer IP's.
- Create device groups. "Sync-Failover". Put both devices in "includes". and check Network Failover (Network failover listen on udp port 1026)
- Confirm both devices are in the Device List area.
- Overview>(click self device)>choose "Sync Device to Group">Choose "Overwrite Configuration">Sync
***** Make sure both devices are using admin username for syncing and they should have same password*****
Hope this helps. If any issues please let us know.
starboystill no change. i configured Vcmp and i want the two Vcmp guests to be active/standby and i am using internal vlan for HA purpose i didn't use separate VLAN
RaghavendraSY_7Cumulonimbus
Hi,
Which bigip version you are using?
If you are using 11.x please verify below link
https://support.f5.com/csp/article/K13946?sr=33711178cso
Please try below steps to fix HA and config sync issues.
- Device Groups >put both boxes back to available.
- Delete the existing device group.
- Reset Device Trust. Choose Generate New Self-Signed Authority.
- reboot the device
- Device Trust>Peer list. Establish peering by giving right peer IP's.
- Create device groups. "Sync-Failover". Put both devices in "includes". and check Network Failover (Network failover listen on udp port 1026)
- Confirm both devices are in the Device List area.
- Overview>(click self device)>choose "Sync Device to Group">Choose "Overwrite Configuration">Sync
***** Make sure both devices are using admin username for syncing and they should have same password*****
Hope this helps. If any issues please let us know.
- starboy
still no change. i configured Vcmp and i want the two Vcmp guests to be active/standby and i am using internal vlan for HA purpose i didn't use separate VLAN
amintejDid you check the logs ? Do you have network failover configured ?
