Forum Discussion
Sabya_361427
Nimbostratus
Nimbostratusno live logs in AOM
I had an upgrade activity in F5.
When it got rebooted, I didn't see any logs in AOM.
What could be the reason?
Do I need to apply some commands to see logs in AOM during reboot?
youssef1
Cumulonimbus
CumulonimbusHi,
unless I'm mistaken, you can't see any upgrade logs/activity in AOM, please check this article:
https://support.f5.com/csp/article/K9403
you can:
- Responsible for status monitoring and maintaining system health
- Provides the ability to turn on, turn off, and restart the BIG-IP Host subsystem
- Supports a hardware watchdog with a minimum five second time-out before a hardware restart
- Provides a command menu, but no shell access
- Supports IPv4 and IPv6 access
- Uses password-based authentication for SSH (root password, by default)
- Provides power supply monitoring
- Menu options allow users to view MAC address, serial number, and some memory configuration
- Supports baud configuration
availlable commande:
AOM Command Menu:
- B Set console baud rate
- I Display platform information
- P Power on/off host subsystem
- R Reset host subsystem
- N Configure AOM network
- S Configure SSH Server
- A Reset AOM
- Q --- Quit menu and return to console
