Need Help on Configuring Virtual Server

Hi Shankar,

1) Check if you are able to ping the VIP from where your trying to access this page.(If you are unable to ping, you need to first fix the reachability) 2) Check the status of Pool (is it green or red in status). If pool is not showing green (check the monitor you set) and also login to ltm using cli and do ping and telnet to pool member. 3) if step 1 and 2 are fine good. Then you can check in cli (tmos) show sys connection | grep 10.0.5.101. If your seeing your connection hit in connection table, for further troubleshooting run tcpdump . 4)tcpdump -vni 0.0:nnn -s 0 "( host 10.0.5.101 and 10.0.3.84 ) or ( host "ip from where your connecting" )"

You should be able to do the basic troubleshooting with above steps. Let me know if any confusion or more information needed.