Multiple Auth

I do think there is an issue with os versions. I installed a fresh copy of 9.1.0 on one server and 9.2.2 on another. The rule I previously posted worked great on the 9.1.0 system (below are the logs [each system has its own timestamp])

 

 

9.1.0

 

19:42:31 Rule ldap: entering auth credential

 

 

19:42:35 Rule ldap: entering auth success

 

 

9.2.2

 

11:27:12 Rule ldap AUTH_WANTCREDENTIAL: entering auth want credential

 

 

11:32:12 Rule ldap AUTH_SUCCESS: entering auth success

 

 

11:32:31 Rule ldap AUTH_ERROR: entering auth error

 

 

The page still displays correctly on 9.2.2 as it did on 9.1.0.

 

 

The default auth sys ldap rule works great on both systems; however I don't like some of the side effects of sys auth ldap. I connect to the virtual server and type and invalid username and leave the password blank. It prompts me for the username and password again. I type the real username and password which does not work. I type it correctly again and the system returns a blank page. This is not the same as the rule I have posted on a 9.1.0 system. I enter an invalid username and leave the password blank. I enter the correct credentials on the second and it works. I could even wait for the third (second attempt is the real username and blank password) to make it work.

 

 

As far as the placement of the rule, I have attached the new Irule in the ldap profile (replacing the existing sys auth ldap Irule). I do not add an Irule to the virtual server under Resources/Irule. I add the ldap profile (with the new Irule) to the auth profiles in the virtual server.

 

 

I see that there is a 9.2.3 version out. How would I go about obtaining a copy?

 

I've done it before but can't remember how I requested it. I would be interested to see if it behaves the same way.

 

 

Thank you for your help,

 

Rob