Lync Director port 5060 -"the children pool members are down

Hi,

 

 

 

Yes the document still needs some work. For the Director pools, I had to manually add the 443 listener and the 4443 Listener, as we are publishing that for external web services through a TMG reverse proxy. The document says to create the 4443 LB for the FE, or optionally the Director, but realistically you will probably need both.

 

 

Another issue I had was I couldn't get external users to connect externally with port 443. I was able to get it to work if I republished the topology using 5061. So what I had to do was create the external edge interface access LB for 443 and make it the same as the 5061 LB, even though the guide says to make it a full HTTP LB with certs, etc.

 

 

As far as getting 5060 to listen, if you want to use the Topolgy Builder, you just go into the properties for the Front End Pool, and check the box for "Enable Hardware Load Balancer monitoring port", by default it is 5060, but it isnt enabled. Check that, then re-publish the topology.

 

 

I have been knocking out issues on mine, but am still having issues getting the whiteboard and powerpoint to work with an external user and internal user.

 

 

 

Hope that helps.

 

 

 

Steve