Lync and BIG-IP Deployment Guide

Hi Mike,

 

 

Thanks for following up. I didn't create a iRule but I did use the GUI to create a new pool and virtual server.

 

 

Pool - Called it Lync-2010_front_end_ip_80_pool and assigned it the Lync-2010_front_end_ip_http_monitor.

 

 

Virtual Server - Called it Lync-2010_front_end_ip_80 with a service port of 80(HTTP). The protocol is TCP The HTTP Profile assigned is Lync-2010_front_end_ip_http (I believe this already exists in the iapp?). SNAT Pool is Auto Map. Under the Resources tab, default pool is Lync-2010_front_end_ip_80_pool and the default persistence profile is Lync-2010_front_end_ip_source_address_persistence.

 

 

Let me know if that helps.

 

 

Thanks,

 

P