Forum Discussion
rajeshgoud
Altostratus
AltostratusLTM standby device state is failsafe fault mode
I have a standby device which is showing the status as failsafe fault mode
in the traffic group the field "Next Active Device Initializing / Not Synced" is the status.
How to rectify the st...
Claudiu_Pustai
Nimbostratus
NimbostratusTo fix the Failsafe fault mode message you will need to do this: 1. Disable the failsafe on all VLANs on both Active and Standby unit 2. Reboot the Standby 3. Once the Standby is online you can re-enable the failsafe on both units.
This should clear the message from the Standby unit.