Forum Discussion
MahendraRaj_131
Nimbostratus
NimbostratusLTM Clustering
Hi
I am working on DC DR solution. I was just thinking whether can we have multiple LTMs in single cluster like.. the Primary DC will have 2 x LTMs and the DR DC will have one LTM. Can I cluster...
You sure can. We do exactly that. You will need to create a sync-failover device group with all the LTMs in it. Look at the Redundant System Configuration Guide, and in particular the section on device groups.
As with an HA pair, you need layer 2 connectivity between all the LTMs.
uni
Altostratus
AltostratusYou sure can. We do exactly that. You will need to create a sync-failover device group with all the LTMs in it. Look at the Redundant System Configuration Guide, and in particular the section on device groups.
As with an HA pair, you need layer 2 connectivity between all the LTMs.
Vishal_Keswani_can I have 4 LTMS in one Cluster and provide a Single VIP ( Virtual IP address) for a pool across all the 4 LTMS ? I have a Pair in Production and a Pair in DR DC and the VLANS are stretched across DC. Is this configuration supported ?