Posted By nitass on 10/22/2012 10:20 PM
VLAN Configuration (I have 1.4 connected to 1.4 with a cross over right now but I can change it if needed. However the interface still shows down)
interface should not be down. can you try another cable or interface? as Steve mentioned, you can use straight cable.
sol9787: Auto MDI/MDIX behavior for BIG-IP platforms
http://support.f5.com/kb/en-us/solutions/public/9000/700/sol9787.html
after interface is up, if it still does not work, can you try to (1) add device to device trust and (2) reset trust device trust (if adding device does not help)? if problem still persists, please open a support case.
Thank you, weird I removed the cross over cable and used a straight through cable and it came right up. Thank you for that tip. Ok so far looks like Active/Standby setup seems to be working. Now the config-sync part I have to see why that is not working. I'm using the HA Self IP's and VLAN's for that and HA VLAN is associated with 1.4 on both Untagged. Am I missing something ?