Forum Discussion
kudakwashet_154
Nimbostratus
NimbostratusI need help in completing this configuration
Hi my company bought a service contract with f5 the code is F5-SVC-BIG-PRE-L1-3, im trying to configure two BIG IP LTM devices but it seems after i have done all the configurations i cannot ping any ...
kudakwashet_154Nimbostratus
NimbostratusThis is the output from the commands you asked me to run, i hope it will help you to help figure this out.
So Cory are we saying i need not to worry about pinging the self ips as long as everything else seems okay.
login as: root
Using keyboard-interactive authentication.
Password:
Last login: Mon May 19 13:58:17 2014 from 10.10.168.14
[root@imm:Active:In Sync] config tmsh list net self
net self 192.168.15.1 {
address 192.168.15.1/24
allow-service {
default
}
traffic-group traffic-group-local-only
vlan external
}
net self 10.10.168.4 {
address 10.10.168.4/24
allow-service {
default
}
floating enabled
traffic-group traffic-group-1
unit 1
vlan internal
}
net self 10.10.168.2 {
address 10.10.168.2/24
allow-service {
default
}
traffic-group traffic-group-local-only
vlan internal
}
net self 192.168.15.3 {
address 192.168.15.3/24
allow-service {
default
}
floating enabled
traffic-group traffic-group-1
unit 1
vlan external
}
net self 192.168.10.1 {
address 192.168.10.1/30
allow-service {
default
}
traffic-group traffic-group-local-only
vlan HA
}
[root@imm:Active:In Sync] config tmsh list ltm virtual-address
ltm virtual-address 0.0.0.0 {
address any
arp disabled
icmp-echo disabled
mask any
traffic-group traffic-group-1
}
ltm virtual-address 10.10.168.100 {
address 10.10.168.100
mask 255.255.255.255
traffic-group traffic-group-1
}
ltm virtual-address 192.168.15.100 {
address 192.168.15.100
mask 255.255.255.255
traffic-group traffic-group-1
}
[root@imm:Active:In Sync] config
