Forum Discussion
Help configuring NAT64 on a BIG-IP LTM
- May 27, 2014
You may need to run packet captures at this point to determine why the page isn't loading:
tcpdump -nni 0.0:n -s0 host 2001:b3e:45f1:6121::7 (client side)
tcpdump -nni 0.0:n -s0 host 192.168.1.7 (server side)
You can have pool members or virtual servers specifying all ports, but your pool member can't be monitored on all ports. The monitor must be specific to a certain protocol/port. If this is an HTTP connection only, then it's best to have your pool member configured with port 80.
As it stands, I have:
Self IP on left interface:
192.168.2.2/28 using external VLAN
2001:b3e:45f1:6121::3/64 using external VLAN
Self IP on right interface:
192.168.1.1/28 using internal VLAN
Virtual Server on left interface:
2001:b3e:45f1:6121::/96
SNAT: Automap
IPv4 Gateway:
192.168.2.1
SNAT:
Translation: Automap
Origin: Address list: 192.168.1.7
VLANs: All
License:
Local Traffic Manager, 1600 Enterprise(Perpetual)
Maximum Compression
ADD SSL MAX TPS
ADD LTM MODULE
ADD DNS EXPRESS
ADD IPV6 GATEWAY
ADD RATE SHAPING
ADD RAMCACHE
50 MBPS COMPRESSION
SSL 500 TPS Per Core
ADD CLIENT AUTHENTICATION
ADD SSL CMP
ADD ROUTING BUNDLE
Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com