Forum Discussion
NimbostratusGTM can't discover LC's Virtual Server ??
I found GTM can't discover LC's Virtual Servert that I jsut set. I can't get any information in gtm/lc log. At first,I throught it's a trust promble,so use[ bigip add [ip]] to fix, but it's not work..... Anyone know the key to fix it?
6 Replies
Sudheer_Nair_88Cirrus
Is GTM successfully communicating with the LTM, tcpdump will help you confirm that.
TechgeeegHi Felix,
There could be multiple answer to your query, the GTM & LTM modules are on the same box or different?? If the modules are two separate units the iquery communication between the units should be established first. Once this is done and you have configured the auto discovery of VS then for sure it must show up. Follow the basics to find out the reason.
Regards,
- felixcccchen_16In my case,GTM & LTM are on the different device OLD VS on LC, GTM still discover normally But.new vs set on LC,GTM can't discover it.......
Techgeeeg_28888Hi Felix,
There could be multiple answer to your query, the GTM & LTM modules are on the same box or different?? If the modules are two separate units the iquery communication between the units should be established first. Once this is done and you have configured the auto discovery of VS then for sure it must show up. Follow the basics to find out the reason.
Regards,
- felixcccchen_16In my case,GTM & LTM are on the different device OLD VS on LC, GTM still discover normally But.new vs set on LC,GTM can't discover it.......
- Techgeeeg
Hi Felix,
In this case you have to check in the configuration in GTM if LC VS auto discovery is enabled or not? If it is not set to automatically discover the VS it will not discover and I believe that is the reason why you are not getting the new LC VS on GTM.
Regards,
