Forum Discussion

RayD's avatar
RayD
Icon for Nimbostratus rankNimbostratus
May 15, 2014

Forwarding to virtual server on another LTM controller

My organization is preparing to run a test and target campaign, where they want to route a small subset of traffic to a new version of the application seamlessly. This works fine if both the old and...
application delivery
devops
iRules
Cory_50405's avatar
Cory_50405
Icon for Noctilucent rankNoctilucent

Is the traffic in question HTTP? If so, this can be done via an HTTP redirect.

 

If not, then your approach of sending to site B's virtual server via site A's LTM should work. You'll need to ensure you perform the appropriate SNAT on site A's LTM so the return traffic will come back through LTM A. You'll also need to ensure the routing and access control within the network is setup to allow the communications from LTM A's SNAT address to the virtual server on LTM B.

 

Cory_50405's avatar
Cory_50405
Icon for Noctilucent rankNoctilucent
May 15, 2014
You can do the HTTP redirect from LTM A. LTM A could be your single place of turning on/off experience B. If you can't get the SNAT communications working between LTM A and B and you want to pursue HTTP redirection, I can assist with an iRule to do so.