F5 Rseries HA

Hi Amr_Ali,

HA is supported only between identically configured BIG-IP tenants at the tenant level between identical rSeries platforms. The tenants must have identical resources to ensure seamless HA failover. To implement HA between the tenants, you set up device service clustering (DSC) on the BIG-IP tenants.

When configuring BIG-IP HA failover on rSeries platforms, consider the following:

HA including serial (hardwired) failover is not supported within or between rSeries platforms at the appliance or F5OS level.

HA is supported only between identically configured BIG-IP tenants at the tenant level between identical rSeries platforms. The tenants must have identical resources to ensure seamless HA failover.

To implement HA between the tenants, you set up device service clustering (DSC) on the BIG-IP tenants. For more information, refer to the following:

Tenant high availability (HA) overview section in the Tenant Management chapter of the F5 rSeries Systems: Administration and Configuration manual.

https://clouddocs.f5.com/training/community/rseries-training/html/rseries_high_availability.html

After that you can configure HA between Tenants as you do in Normal F5 LTM or other boxes in TMOS

https://clouddocs.f5.com/training/community/adc/html/class1/module1/lab4.html

Please let me know if you still have more queries, i will be glad to assist you.

HTH

🙏