Forum Discussion
NimbostratusF5 rseries ha interconnect between platform at f5OS level, not at tenant level
Hi,
This architecture represents a lag between two interfaces in F5OS-A and F5OS-B, this lag has an HA Vlan configured and delivered in each Tenant to configure the HA funtionality, please review the post I sent you, HA is only supported against tenants. it doesn't make any sense to configure HA between chassis.
Take in mind that you have to create the Vlans, LAGs "with LACP or not", Port Groups in the chasis level and then select all the vlans you want to provision at the Tenant level.
NimbostratusThanks Sir, you said:
" this lag has an HA Vlan configured and delivered in each Tenant to configure the HA funtionality"
Please do you have a link or an example of this kind of configuration?
Many thanks
Hi,
please review this link:
But the basic steps are:
- At the chassis create Vlan for HA
- Create a lag with LACP or not and associate the VLAN for the HA you have created, it could be Tag o Untaged "this step is not mandatory".
- At the chasis level create the tenant and associate the VLAN you have created and repeate the steps in the other chasis.
- Deploy the basic config in the tenant.
- Create self ips at tenant level and select tha HA VLAN "It´s created by the chasis".
- Configure the HA at the tenant level.
This post can guide you to configure the networking element in the Chasis level too:
And this for configure the HA
https://clouddocs.f5.com/training/community/adc/html/class6/Module1/Lab2.html
It include old steps for configure Vlans and trunks, please avoid this info because it have to be configured at chasis level.
- dbamini
I have another question, when we migrate a platform to rseries and we create an HA VLAN, will this HA VLAN replace the HA VLAN of the source platform?
Thanks in advanced
