Forum Discussion
ndubey2
Cirrus
CirrusF5 rSeries deployment and migration
I need to deploy rSeries 5900 F5 LTM and also need to migrated services from vCMP boxes to new rSeries 5900. Can I simply download UCS file from existing vCMP and upload it on new rSeries? If not wha...
I used the UCS platform-migrate approach to migrate vCMP guest to rSeries Tenant and it worked perfectly fine as I have all the config. Below is the link.
VGF5
Cumulonimbus
CumulonimbusDirect UCS import is not supported and may result in errors or an unusable configuration. As Jeffrey_Granier mentioned, you can use Jouneys as described.
I encountered various issues during the Virprions to rSeries migration. I adjusted my plan and followed the steps below. And you can use as your plan B
- Create and deploy a BIG-IP tenant (matching the required version) on the rSeries
- Assign the necessary VLANs and interfaces to the tenant from the F5OS-A layer.
- Generate an SCF file :
tmsh save /sys config file <filename>.scf - Before loading, review and edit the SCF file meaning Remove any vCMP-specific configuration blocks.
- Transfer the SCF file to the new rSeries tenant and run :
tmsh load /sys config file <filename>.scf merge
