Forum Discussion

ChetanAr_315803's avatar
Jan 12, 2018

F5 not responding to snmp v2 queries

Hello, F5 is not responding to snmp v2 queries because of which monitoring tool (zabbix, opennms) are not able to update the database. What could be wrong here? We are running 12.1.2.

 

  • It is resolved now. My public community was not configured correctly. It was using the format 'IPv4 public : default :' while the correct format is: 'IPv4 public : default'.

     

    Thanks everyone for your help :)

     

  • System > SNMP > Agent > Configuration Add your SNMP Server IP as the host and click add. This will whitelist that SNMP server to probe the F5.

     

    System > SNMP > Agent > Access (v3) Create > Username an Auth/Priv information. OID: .1

     

    Network > Self IPs > Your incoming interface for SNMP > Verify "Allow Default" is allowed on the port lock down, otherwise add SNMP service to the port list with "Allow Custom"

     

    Also see: https://support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/tmos-implementations-11-1-0/20.html

     

  • does snmpwalk work?

    e.g.

    [root@ve13a:Active:In Sync] config  snmpwalk -v 2c -c public localhost F5-BIGIP-SYSTEM-MIB::sysSystemUptime.0
    F5-BIGIP-SYSTEM-MIB::sysSystemUptime.0 = Timeticks: (178965400) 20 days, 17:07:34.00
    
  • does snmpwalk work?

    e.g.

    [root@ve13a:Active:In Sync] config  snmpwalk -v 2c -c public localhost F5-BIGIP-SYSTEM-MIB::sysSystemUptime.0
    F5-BIGIP-SYSTEM-MIB::sysSystemUptime.0 = Timeticks: (178965400) 20 days, 17:07:34.00