Forum Discussion
Richard_22613
Nimbostratus
NimbostratusF5 Lync iApp with Cisco firewalls
I have configured the Lync iApp on a F5 LTM in our DMZ behind a Cisco firewall.
The client AV traffic goes through the firewall, hits the F5, which sends it on to one of the edge servers (in the...
farache_28983Nimbostratus
NimbostratusHey guys , sorry for bringing this thread back to life but i am facing a similar situation.
currently when the client tries to connect to the Edge, I see the packet reaching the server with the real IP ( the edge has default GW the Bigip floating IP). The Edge has an internal interface going out back to a FW and back to the BIGIP for reaching the internal Frontend servers. The Bigip has a Forward VIP for routing the traffic from this source.
When I do a dump in the Front end server, I see the packet reaching but with an IP of the BigIP interface.... Which is weird.. Either way at this point the server is killing the connection with a RST,
In the documentation, is not clear to me if the Front end and Edge have to live in the same network...
can someone clarify? I did all above but did not work for me expect for the connection from external to Edge
