Forum Discussion
MartinVKonov_15
May 29, 2014Nimbostratus
F5 LTM Transparent mode configuration
Dear All,
I am trying to configure BIG-IP LTM device to work in transparent mode in order to replace Cisco ACE device.
I have already done several configurations but the results are not so good...
nitass
May 30, 2014Employee
this is mine.
version
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) show sys version |grep -A 6 Package
Main Package
Product BIG-IP
Version 11.3.0
Build 3144.0
Edition Hotfix HF8
Date Thu Oct 3 18:22:28 PDT 2013
config
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) list net vlan-group
net vlan-group vg {
members {
external
internal
}
}
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) list net vlan external
net vlan external {
if-index 256
interfaces {
1.1 {
tagged
}
}
tag 1149
}
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) list net vlan internal
net vlan internal {
if-index 240
interfaces {
1.1 {
tagged
}
}
tag 423
}
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) list net self
net self 200.200.200.18/24 {
address 200.200.200.18/24
allow-service {
default
}
traffic-group traffic-group-local-only
vlan vg
}
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos) list ltm virtual
root@(B1600-R66-S18)(cfg-sync Standalone)(Active)(/Common)(tmos)
arp
[root@B1600-R66-S18:Active:Standalone] config tmsh show net arp
---------------------------------------------------------------------------------------------
Net::Arp
Name Address HWaddress Vlan Expire-in-sec Status
---------------------------------------------------------------------------------------------
200.200.200.3 200.200.200.3 0:50:56:b3:78:63 /Common/external 189 resolved
200.200.200.101 200.200.200.101 0:50:56:b3:1:b /Common/internal 200 resolved
trace
[root@B1600-R66-S18:Active:Standalone] config tcpdump -nni 0.0 -s0 -e icmp or arp
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on 0.0, link-type EN10MB (Ethernet), capture size 65535 bytes
10:44:40.249064 00:50:56:b3:01:0b > 02:50:56:b3:78:63, ethertype 802.1Q (0x8100), length 109: vlan 423, p 0, ethertype IPv4, 200.200.200.101 > 200.200.200.3: ICMP echo request, id 28204, seq 1, length 64 in slot1/tmm1 lis=
10:44:40.249457 02:50:56:b3:01:0b > 00:50:56:b3:78:63, ethertype 802.1Q (0x8100), length 109: vlan 1149, p 0, ethertype IPv4, 200.200.200.101 > 200.200.200.3: ICMP echo request, id 28204, seq 1, length 64 out slot1/tmm0 lis=
10:44:40.250039 02:50:56:b3:78:63 > 00:50:56:b3:01:0b, ethertype 802.1Q (0x8100), length 109: vlan 423, p 0, ethertype IPv4, 200.200.200.3 > 200.200.200.101: ICMP echo reply, id 28204, seq 1, length 64 out slot1/tmm0 lis=
10:44:40.249957 00:50:56:b3:78:63 > 02:50:56:b3:01:0b, ethertype 802.1Q (0x8100), length 109: vlan 1149, p 0, ethertype IPv4, 200.200.200.3 > 200.200.200.101: ICMP echo reply, id 28204, seq 1, length 64 in slot1/tmm1 lis=
Recent Discussions
Related Content
DevCentral Quicklinks
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com
Discover DevCentral Connects