F5 Load balancer not working, but all the configurations are successful

Hi gauravkool it worked thanks mate

Hi,

Sorry if I repeat any previous posts/questions. This is a quick response intended as rough guideline.

How you troubleshoot this depends heavily on how you are setup. So here I am making some assumptions.

If you are connecting from same VLAN as VIP, all you need to do is start a quick tcpdump from CLI to confirm the client can establish a 3-WAY tcp handshake with VIP. i.e:

tcpdump -s0 -nni VLAN_NAME:nnn host YOUR_CLIENT_IP_HERE or arp or icmp

So, if you are using standard VIP you should see SYN arrive to F5 and SYN/ACK go back towards client (Check layer2 as well as layer 3 addresses please) and ACK back from CLIENT, followed by HTTP request from Client (typical 3WHS). If you see HTTP request from client, can you confirm the server is receiving this ? If you can get the first part of this puzzle then you are closer to solving the problem.

If you need more help can I suggest you paste in your VIP and pool config for everyone's benefit. Of course if the IP is sensitive to you then feel free to mask that out.

I hope that helps.

Rgds,

Alex

Hi,

I checked bigip_error_maps.dat (in /var/run/ folder) looking for both 01200004 code as well as "rejected" word and nothing was returned matching posted entry, I was pretty sure that everything that is placed in ltm log should have entry in this file - am I wrong?

Considering problems with this VS - what version of LTM are you running? Can you ping selfIP of this LTM on the VLAN you have your VS defined? Actually Virtual IP used by VS should reply to ping even if VS is disabled or pool is down. This can be turned of in "Local Traffic ›› Virtual Servers : Virtual Address List ›› your VIP name" by setting ICMP Echo to disabled (this option is available with new versions, I thing 11.5+). You can as well disable icmp using Packet Filter. Still both those options are not creating any entries similar to posted in my ltm log.

Piotr

Hi all,

I found the my Virtual Server is been hit by the request, but all my request are dropped.

and also found the below in my ltm log

Apr 13 11:31:46 local/tmm1 notice tmm1[5137]: 01200004:5: Packet rejected remote IP 136.2xx.1xx.2xx port 0 local IP 10.x1.1xx.1x port 3 proto ICMP: Port closed.

this may be helpful.

Quick Start: Application Delivery Fundamentals by Josh Michaels

this may be helpful.

Quick Start: Application Delivery Fundamentals by Josh Michaels

Transactions are logged in /var/log/ltm

There are plenty of places we could start looking depending on the root cause.

First thing to consider is whether the frames are actually getting treatment from the VIP you think it is. I've seen folks get messed up by the processing order for instance https://support.f5.com/kb/en-us/solutions/public/9000/000/sol9038.html

You could try a "noisy" tcpdump; https://support.f5.com/kb/en-us/solutions/public/13000/600/sol13637.html

For you it would look something like;

tcpdump -ni 0.0:nnn "(host and port 80)" or "(host or host ...)" -s 0 -w

BIGIP adds a trailer that, when possible, tells you which VIP handled the frame. Of course, to make sense of it, you need that dissectors. You can grab those from; https://devcentral.f5.com/Wiki/AdvDesignConfig.F5WiresharkPlugin.ashx

Even without dissection, though the tcpdump will help you home in on the point of failure (are the frames even reaching F5? Can we see client-side counter-parts to these? etc) so maybe start there.

Cheers, Bernie

Whats the default gateway of your servers? If its not the F5 have you enabled SNAT?

Does the port you specified on the pool member match what you have on the VS? Is the pool assigned to the VS? Does the monitor you assign match the service you are trying to connect to? If you assign a different monitor, you could still get a positive feedback (Green) whereas the real service (http in this case) might not be available.

Please verify these.

Hi, please find the answers

2) VIP IP

3) web page not found error.

I want to trace the complete process, where can i find the trace logs. ? and how to ensure that the my VIP is hit. ?