Forum Discussion

Xtekni_240126's avatar
Xtekni_240126
Icon for Nimbostratus rankNimbostratus
Mar 07, 2017

F5 LAB issue - Not able to browse to 10.1.0.145 as stated in cbt nuggets

F5 Lab issue. I have seen this asked before many times but none of the answers work for me. I must be missing something here. I have got to the part were I enter the 10.1.0.145 address in the virtual...
BIG-IP
devops
f5 lab
not working
plethore_312934's avatar
plethore_312934
Icon for Cirrus rankCirrus

Are you able to ping the 10.1.0.145 address from your PC?

 

I used VMware player but I had a similar issue. In VirtualBox make sure that VMnet1 Subnet settings is set to the 10.1.0.0 Subnet.

 

On my PC the VMnet1 Adapter has a static ip of 10.1.0.1 subnet mask 255.255.255.0

 

Xtekni_240126's avatar
Xtekni_240126
Icon for Nimbostratus rankNimbostratus
Mar 08, 2017

Well I was wondering if the virtual adaptor should have an ip on it when viewing it rom the network settings on the windows 10 machine. I did try putting 10.1.0.1 at one point as a test to see if that helped. But it did not and I have not been able to ping the 10.1.0.145 address at any point on either PC that the lab is installed on. There must be something stupid I have missed. It cannot be this difficult to setup a LAB on a VM.