Forum Discussion
NimbostratusF5 certificate not working for all ports.
Folks, We have a wild card certificate configured on the F5 and this certificate caters to a VIP which listens to all ports. i.e. http://hostname.externaldomain.com:**.
For some reasons the certificate does not work for all ports and the behavior we see is wired. It may work for one port and not for the other.
When we reboot the F5 it may work for another port but not for the port it worked earlier.
Any suggestion?
Note, this VIP has many node behind it and moves requests based on a configured iRule. This iRule work fine for non-https based requests.
Thanks!!! N.
22 Replies
PeteWhiteEmployee
Take a look here which says "Note: When using the option on a virtual server with a destination port of "any", port translation must be enabled. Port translation is disabled by default when a virtual server has a destination port of "any"."
 
So you should enable port translation as you are manually setting the port.
 
- PeteWhite
Take a look here which says "Note: When using the option on a virtual server with a destination port of "any", port translation must be enabled. Port translation is disabled by default when a virtual server has a destination port of "any"."
So you should enable port translation as you are manually setting the port.
