F5 BIG-IP Config Assistance Needed

Hello everyone.

 

 

I have a somewhat strange topology in use, and I'm looking for some help/advice.

 

 

I have my BIG-IP trunked (well... 'tagged' I think F5 calls it) to a Cisco 4948 switch. That switch is trunked to a 6509 switch, that has the vlans 100 (servers-outside) and 200 (servers-inside) defined on switched virtual interfaces (SVIs). This would then make "self-IP's" unnecessary on the BIG-IP, correct?

 

 

I have "servers-inside" configured as a Tagged interface on interface 2.1, and "servers-outside" configured as an Untagged interface also on interface 2.1.

 

 

Is this correct? I've attached a png image of my topology.

 

 

I'm trying to use virtual server 192.168.0.10:80, which has just server1 in the pool, 10.100.1.10:80, which isn't working. However, I have a feeling my initial setup is incorrect, so I want to troubleshoot that first.

 

 

Thanks!!