Forum Discussion

Abed_AL-R's avatar
Abed_AL-R
Icon for Cirrostratus rankCirrostratus
Oct 04, 2020

email alert notification not working when member came up again

Hello guys i've configured this: https://support.f5.com/csp/article/K3667 https://support.f5.com/csp/article/K59616664 I receive alerts when node goes down, but not when going up again Wha...
alert
application delivery
BIG-IP
email
LTM
notification
snmp
Abed_AL-R's avatar
Abed_AL-R
Icon for Cirrostratus rankCirrostratus

This is my config:

alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_STATUS_UP "Pool member (.*?) monitor status up."{
    snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.11";
email toaddress="my@email.com"
fromaddress="f5"
body="A pool member went up!"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_STATUS "Node (.*?) monitor status down."{
    snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.12";
email toaddress="my@email.com"
fromaddress="f5"
body="Please notice the status of the node!"
}
alert BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_STATUS_UP "Node (.*?) monitor status UP."{
    snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.13";
email toaddress="my@email.com"
fromaddress="f5"
body="Please notice the status of the node!"
}
alert BIGIP_MCPD_MCPDERR_POOL_MEMBER_MON_STATUS "Pool member (.*?) monitor status down."{
    snmptrap OID=".1.3.6.1.4.1.3375.2.4.0.10";
email toaddress="my@email.com"
fromaddress="f5"
body="A pool member went down!"
}

How should I adjust it?

Dario_Garrido's avatar
Dario_Garrido
Icon for MVP rankMVP
Oct 07, 2020

Hello Abed.

First of all, you are using mixing existing tags with your custom expressions. I don't recommend you to do that.

Sometimes, existing tags have some little mistakes. As you can see below one tag expression has an space between the IP and the address and the other not.

# cat /etc/alertd/bigip_mcpd_error_maps.h | grep MON_STATUS | grep Node
0 LOG_NOTICE    01070640 BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_STATUS "Node %s address %s monitor status %s."
0 LOG_NOTICE    01070728 BIGIP_MCPD_MCPDERR_NODE_ADDRESS_MON_STATUS_UP "Node %saddress %s monitor status up."

My recommendation is to use your own definition of tags in the user_alert.conf. This expressions should work in your case.

alert NODE_UP "Node (.*) monitor status up" {
   ...
}
 
alert NODE_DOWN "Node (.*) monitor status down" {
   ...
}
 
alert POOL_UP "Pool (.*) monitor status up" {
   ...
}
 
alert POOL_DOWN "Pool (.*) monitor status down" {
   ...
}

BTW, you have to pay attention carefully to the expression to not miss some character. Take into account dots and remove this '?' in your (.*?) regex.

## POOLS
notice mcpd[2964]: 01070638:5: Pool <Pool_name> member <ServerIP_port> monitor status down [ <MonitorA_name>: down, <MonitorB_name>: down ] [ was up for <#>hrs:<#>mins:<#>sec ]
notice mcpd[2964]: 01070727:5: Pool <Pool_name> member <ServerIP_port> monitor status up. [ <MonitorA_name>: down, <MonitorB_name>: up ] [ was down for <#>hrs:<#>mins:<#>sec ]
 
## NODES
notice mcpd[2964]: 01070640:5: Node <ServerIP> monitor status down.
notice mcpd[2964]: 01070728:5: Node <ServerIP> monitor status up.

REF - https://support.f5.com/csp/article/K12531

Please, don't forget to mark this answer as the best to help me for this contribution.

Regards,

Dario.