Forum Discussion
Fabrizio_Chiava
Nimbostratus
Nimbostratusconfiguring trunk with Cisco Nexus 7000
Hello everybody,
I need help to an issue.... I’ve a network problem
about Viprion and Trunks. I configured a Trunk between a Cisco Nexus 7000 and a
BIGIP Viprion with Blade 100:
...
The_BhattmanNimbostratus
NimbostratusHi Fabriziom
I think the following configuration on the NX 7K. However, I think the key might be that you have to use tagged vlans for the 802.1q trunk to work.
interface port-channel50
description port-channel
switchport mode trunk
switchport trunk allowed vlan 310,330,610,630
spanning-tree port type edge
Configure the server ports.
interface Ethernet2/9
description VIPRION
switchport mode trunk
switchport trunk allowed vlan 310,330,610,630
channel-group 50 mode active
no shutdown
interface Ethernet2/10
description VIPRION
switchport mode trunk
switchport trunk allowed vlan 310,330,610,630
channel-group 50 mode active
no shutdown
I hope this helps
Bhattman
