Forum Discussion
Greg_Black
Altostratus
AltostratusConfiguring the management IP for a new VE BigIP LTM
Hey guys,
I am putting in place a new VE BigIP LTM version 11.4.1 to take the place of an older 10.2.2 VE. The older one is still up and running so I am not currently using that mgmt IP. The new VE is a VHD and has been setup using settings that match the older one, (VLAN, RAM, CPU, etc).
-On the new VE, I have manually removed DHCP: tmsh modify sys global-settings mgmt-dhcp disabled
-Next, I added a new IP for the management IP: tmsh create /sys management-ip
/
-Once I added it, I verified it by using this: tmsh list /sys management-ip
All appears to look good, but for some reason it will still not allow me access to the GUI. Am I missing something here? Any help or direction would be greatly appreciated.
GB
Motsware_231000Nimbostratus
I had the same issue only to find out that the firewall was blocking the traffic. Enabled https traffic to the management ip address of the F5 to resolve the issue.
NUT2889Cirrostratus
Did you run "tmsh save sys config"?
boneyardMVP
route perhaps?
is there a reason why you don't use the usual command: config ?
IainThomson85_1Cumulonimbus
Have you removed the MGMT IP from the old device ?
Greg_BlackNo, because it is still in use. I have put a different Mgmt IP in place for the new F5 so that I can configure it in the GUI.