NimbostratusHi guys.
I have run in to the situation with several virtual systems(tenant) in clustered r5600, and where OSPF should be deployed on each virtual system with the peering Check point clustered VSX 6700. How could I implement the routing? via CLI or GUI? and if there is some document or notes for reference?
Regards
MVPYou can get to the OSPF settings via the gui under network / route domains. That being said - I dont know of anyone that would do that. Everyone i know that handles dynamic routing protocols does it via command line - regardless of vendor. Also, after configuration - odds are you are going to want to test - and testing is most likely to be done at the CLI as well.
https://my.f5.com/manage/s/article/K65954220
https://my.f5.com/manage/s/article/K14490
https://f5-agility-labs-adc.readthedocs.io/en/latest/class5/intro.html
https://techdocs.f5.com/en-us/bigip-14-0-0/big-ip-dynamic-routing-with-tmsh-and-icontrol-rest-14-0-0.html
https://techdocs.f5.com/en-us/bigip-14-1-0/big-ip-tmos-routing-administration-14-1-0.html
you can dive deeper into imish (shell for adminsistering dynamic routing), and or zebos which is based on zebra code. 'Zebra code constitutes the development foundation for IP Infusion's commercial ZebOS'
NimbostratusHi PhatANhappy, thanks for helpful message.
And in my case, oppf+vrf would be depolyed for virture system and seperation.I wonder how to implement the configuration.
Regards
Richard
