Forum Discussion
Alex_Tsang
Nimbostratus
NimbostratusConfiguration of the custom parameters of the RDP application in APM
Hi all I configured a RDP application by using native client type in the APM and I would like to put some RDP configuration (such as below) in the customer parameters. But after I add it, I fou...
Smithy
Cirrostratus
CirrostratusHi Alex,
Yes, they should be in the RDP file. I removed "use multimon:i:1" and "span monitors:i:1" for this test from the above configuration.
This is the RDP file from my test with only "redirectclipboard:i:0" included in the "Customer Parameters":
authentication level:i:0
enablecredsspsupport:i:0
full address:s:rdsh1.f5.demo
gatewayaccesstoken:s:uLOn/y2GmR7_fHAEtXsw9w
gatewaycredentialssource:i:5
gatewayhostname:s:rdp.f5.demo
gatewayprofileusagemethod:i:1
gatewayusagemethod:i:1
redirectclipboard:i:0
server port:i:3389
Cheers,
Brett
Alex_TsangHi Brett
We finally find that the custom parameters will apply after we reboot the system, so I believe this may be bug in my release and we opened case in F5.
Best regards
Alex Tsang
