Forum Discussion

soymanue's avatar
soymanue
Icon for Nimbostratus rankNimbostratus
Jul 19, 2012

ConfigSync issue with LTM 11.2 HF1

Hello   I have upgraded two BIG-IP 3600 from version 11.1 to 11.2 HF1.   High Availability seems to be working, but ConfigSync fails.   Both devices show "Disconnected" state.   If you go ...
config
design
Anthony's avatar
Anthony
Icon for Nimbostratus rankNimbostratus
Jan 30, 2013

 

Running the commands you mention (I tried telnet on both self IP and management port):

 

 

root@(device2)(cfg-sync Disconnected)(Active)(/Common)(tmos) list cm device configsync-ip

 

cm device Device1 {

 

configsync-ip 192.168.10.170

 

}

 

cm device Device2 {

 

configsync-ip 192.168.11.170

 

}

 

[root@device2:Active:Disconnected] config telnet 192.168.10.170 6699

 

Trying 192.168.10.170...

 

telnet: connect to address 192.168.10.170: No route to host

 

[root@device2:Active:Disconnected] config telnet 192.168.63.63 6699

 

Trying 192.168.63.63...

 

telnet: connect to address 192.168.63.63: Connection refused

 

 

 

 

and...

 

root@(device1)(cfg-sync Disconnected)(Standby)(/Common)(tmos) list cm device configsync-ip

 

cm device Device1 {

 

configsync-ip 192.168.10.170

 

}

 

cm device Device2 {

 

configsync-ip 192.168.11.170

 

}

 

[root@device1:Standby:Disconnected] config telnet 192.168.11.170 6699

 

Trying 192.168.11.170...

 

telnet: connect to address 192.168.11.170: No route to host

 

[root@device1:Standby:Disconnected] config telnet 192.168.63.216 6699

 

Trying 192.168.63.216...

 

telnet: connect to address 192.168.63.216: Connection refused

 

 

The no route to host - is that the most likely culprit?